Once you have downloaded your new driver, you'll need to install it. In Windows, use a built-in utility called Device Manager, which allows you to see all of the devices recognized by your system, and the drivers associated with them.
Aztech wireless n usb 2.0 adaptor driver download
Recommendation: If you are a novice computer user with no experience updating drivers, we recommend using DriverDoc [Download DriverDoc - Product by Solvusoft] to help you update your Aztech Wireless USB Adapter driver. DriverDoc is a utility that automatically downloads and updates your WL552USB drivers, ensuring you are installing the correct driver version for your operating system.
High Speed WIFI Performance for PCAztech WL592USB Wireless Dual Band AC USB 2.0 Adapter complies with IEEE 802.11ac/a/b/g/n standards, and is designed to provide up to 450Mbps high-speed and unrivaled wireless performance for your PC. With a faster wireless connection, you can get a better internet experience, such as downloading, gaming, video streaming and so on. With the media player which has the adapter driver, you are also able to make your media player wireless ready.High Gain Detachable Antenna for Unrivaled Wireless PerformanceThe WL592USB comes with one 1.5dBi detachable antennas which provides unrivaled wireless performance and enhanced the wireless signal for farther range of the wireless coverage. It also allows you to flexibly change to even higher gain antenna for better performance. The USB adapter adopts MIMO technology, which can bring a faster, wider, and more stable wireless experience.Advanced SecurityAztech WL592USB supports 64/128-bit strength WEP encryptions, as well as WPA/WPA2 encryptions and mechanisms encryption to prevent outside intrusion and protect your personal information from being exposed.Easy to UseThe device is easy to setup - install the necessary driver software, connect it to an available USB slot, and then connect to a wireless network. Enable your PC ready for high speed WIFI connection. Perfect for HD media streaming and online gaming enthusiast.Warranty Information* 1 year
Aztech WL572USB drivers will help to eliminate failures and correct errors in your device's operation. Download Aztech WL572USB drivers for different OS Windows versions (32 and 64 bit). After you have downloaded the archive with Aztech WL572USB driver, unpack the file in any folder and run it.
Empower your networking on your PC with an extra degree of flexibility and connectivity for both your business and personal use. With the use of Aztech USB Wireless Adapter, its an inexpensive and convenient way to enjoy instant WiFi Dual Band AC internet connection.\r\n\r\nKey Features:\r\n\r\n\r\n\tWireless-N data transfer rate up to 300Mbps\r\n\tLow Power Consumption\r\n\tWi-Fi Protected Setup (WPS)\r\n\r\n\r\nWL572USB is a wireless USB Adapter which complies with the most advanced IEEE 802.11n standard and can deliver up to 150Mbps stable wireless data rate. It supports WPS (Wi-Fi Protected Setup) to help you create wireless secure connection quickly to prevent outside intrusion and to protect your personal information from being exposed. It can be used to share wireless network with others as a wireless AP by the mode of soft AP and provide quite stable wireless signal. Generally, it is the perfect solution for small offices and home needs.\r\n\r\nHighlights\r\n\r\n\r\n\tComplies with 11N standard, up to 150Mbps high-speed transmission rate\r\n\t64\/128-bit WEP encryption and WPA\/WPA2, WPA-PSK\/WPA2-PSK (TKIP\/AES) security\r\n\tSupports WPS (Wi-Fi Protected Setup) with one-click\r\n\r\n\r\nFeatures\r\n\r\n\r\n\tComplies with IEEE 802.11n and IEEE 802.11g\/b standards for 2.4GHz Wireless LAN\r\n\tUp to 150Mbps data rate for Wi-Fi network\r\n\tSupports 64\/128-bt WEP, WPA\/WPA2 and WPA-PSK\/WPA2-PSK (TKIP\/AES) encryption\r\n\tWPS button allows to build a security connection by one click\r\n\tSupports infrastructure and Ad-Hoc network modes\r\n\tLow power consumption\r\n\tTransmission distance up to 100m indoor and 300m outdoor\r\n\tSupports Windows XP, Vista, Windows 7 (32\/64) , Windows 8 (32\/64)\r\n\r\n\r\n\r\n\r\nHardware\r\n\r\n\r\n\t\r\n\t\t\r\n\t\t\tInterface: \r\n\t\t\tUSB 2.0 \r\n\t\t\r\n\t\t\r\n\t\t\tChipset:\r\n\t\t\tMT7601U \r\n\t\t\r\n\t\t\r\n\t\t\tButton: \r\n\t\t\tWPS button\r\n\t\t\r\n\t\t\r\n\t\t\tLED Indicators: \r\n\t\t\tStatus \r\n\t\t\r\n\t\t\r\n\t\t\tDimensions:\r\n\t\t\t49.8mm x 16.8mm x 6.7mm (L x W x H) \r\n\t\t\r\n\t\t\r\n\t\t\tAntennas: \r\n\t\t\t1*internal antenna \r\n\t\t\r\n\t\t\r\n\t\t\tEnvironment: \r\n\t\t\t\r\n\t\t\t\r\n\t\t\t\tOperating Temperature: 0oC 40oC (32oF 104oF\r\n\t\t\t\tStorage Temperate: -40oC 70oC (-40oF 158oF)\r\n\t\t\t\tOperating Humidity: 10oC 90oC non-condensing\r\n\t\t\t\tStorageHumidity: 5% 95% non-condensing\r\n\t\t\t\r\n\t\t\t\r\n\t\t\r\n\t\r\n\r\n\r\nWireless\r\n\r\n\r\n\t\r\n\t\t\r\n\t\t\tStandards:\r\n\t\t\t\r\n\t\t\t\r\n\t\t\t\tIEEE 802.11n \r\n\t\t\t\tIEEE 802.11g \r\n\t\t\t\tIEEE 802.11b\r\n\t\t\t\r\n\t\t\t\r\n\t\t\r\n\t\t\r\n\t\t\tRF Frequency:\r\n\t\t\t2.4 2.4835GHz \r\n\t\t\r\n\t\t\r\n\t\t\tData Rate:\r\n\t\t\t\r\n\t\t\t\r\n\t\t\t\t802.11n : up to 150Mbps \r\n\t\t\t\t802.11g : up to 54Mbps (dynamic) \r\n\t\t\t\t802.11b : up to 11Mbps (dynamic) \r\n\t\t\t\r\n\t\t\t\r\n\t\t\r\n\t\t\r\n\t\t\tWireless Security: \r\n\t\t\t\r\n\t\t\t\r\n\t\t\t\t64\/128-bit WEP\r\n\t\t\t\t WPA\/WPA2\r\n\t\t\t\t WPA-PSK\/WPA2-PSK (TKIP\/AES)\r\n\t\t\t\r\n\t\t\t\r\n\t\t\r\n\t\t\r\n\t\t\tOutout Power: \r\n\t\t\t20dBm (Max.) \r\n\t\t\r\n\t\t\r\n\t\t\tChannels: \r\n\t\t\t\r\n\t\t\t\r\n\t\t\t\t1-11 (North America) \r\n\t\t\t\t1-13 (General Europe) \r\n\t\t\t\t1-14 (Japan) \r\n\t\t\t\r\n\t\t\t\r\n\t\t\r\n\t\t\r\n\t\t\tModulation Type: \r\n\t\t\t\r\n\t\t\t\r\n\t\t\t\tDBPSK \r\n\t\t\t\tDQPSK \r\n\t\t\t\tCCK\r\n\t\t\t\tOFDM (BPSK,QPSK,16-QAM\/64-QAM)\r\n\t\t\t\r\n\t\t\t\r\n\t\t\r\n\t\t\r\n\t\t\tReception Sensitivity:\r\n\t\t\t\r\n\t\t\t\r\n\t\t\t\t135M: -65dBm@10% PER \r\n\t\t\t\t108M: -68dBm@10% PER \r\n\t\t\t\t54M: -68dBm@10% PER \r\n\t\t\t\t11M: -85dBm@8% PER \r\n\t\t\t\t6M: -88dBm@10% PER \r\n\t\t\t\t1M: -90dBm@8% PER \r\n\t\t\t\r\n\t\t\t\r\n\t\t\r\n\t\r\n\r\n","image": " _product_images/product-1541/aztech-wl572usb-wireless-n-usb-2-0-adapter-6186-63708172-166f12f168619562b328205efa4b027e-420x420.jpg","offers": "@type": "Offer","priceCurrency": "MYR","price": "24.90"}"@context": " ","@type": "BreadcrumbList","itemListElement": ["@type":"ListItem","position":1,"item":"@id":" =common/home","name":"Home","@type":"ListItem","position":2,"item":"@id":" -wl572usb-wireless-n-usb-2-0-adapter","name":"Aztech WL572USB Wireless N USB 2.0 Adapter"]
U-Boot 1.1.3 (Nov 1 2010 - 09:32:19)Board: Ralink APSoC DRAM: 32 MBrelocate_code Pointer at: 81fb0000 Set info->start[0]=BF000000flash_protect ON: from 0xBF000000 to 0xBF01D3C3flash_protect ON: from 0xBF030000 to 0xBF030FFF============================================Ralink UBoot Version: 3.3--------------------------------------------ASIC 3052_MP2 (Port5None)DRAM component: 128 Mbits SDRDRAM bus: 32 bitTotal memory: 32 MBytesFlash component: NOR FlashDate:Nov 1 2010 Time:09:32:19============================================icache: sets:256, ways:4, linesz:32 ,total:32768dcache: sets:128, ways:4, linesz:32 ,total:16384 ##### The CPU freq = 384 MHZ #### SDRAM bus set to 32 bit SDRAM size =32 MbytesPlease choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load system code then write to Flash via TFTP. 3: Boot system code via Flash (default). 4: Entr boot command line interface. 9: Load Boot Loader code then write to Flash via TFTP.3: System Boot system code via Flash.## Booting image at bf050000 ... Image Name: MIPS OpenWrt Linux-3.2.9 Created: 2012-03-06 2:33:53 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 820938 Bytes = 801.7 kB Load Address: 80000000 Entry Point: 80000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OKNo initrd## Transferring control to Linux (at address 80000000) ...## Giving linux memsize in MB, 32Starting kernel ...[ 0.000000] Linux version 3.2.9 (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Tue Mar 6 10:33:38 SGT 2012[ 0.000000] bootconsole [early0] enabled[ 0.000000] CPU revision is: 0001964c (MIPS 24Kc)[ 0.000000] Ralink RT3052 id:1 rev:3 running at 384.00 MHz[ 0.000000] Determined physical RAM map:[ 0.000000] memory: 02000000 @ 00000000 (usable)[ 0.000000] Initrd not found or empty - disabling initrd[ 0.000000] Zone PFN ranges:[ 0.000000] Normal 0x00000000 -> 0x00002000[ 0.000000] Movable zone start PFN for each node[ 0.000000] early_node_map[1] active PFN ranges[ 0.000000] 0: 0x00000000 -> 0x00002000[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128[ 0.000000] Kernel command line: board=HW550-3G console=ttyS1,57600 mtdparts=physmap-flash.0:192k(uboot)ro,64k(ubootenv)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware)console=ttyS1,57600 rootfstype=squashfs,jffs2[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes[ 0.000000] Writing ErrCtl register=00044007[ 0.000000] Readback ErrCtl register=00044007[ 0.000000] Memory: 29992k/32768k available (1885k kernel code, 2776k reserved, 310k data, 160k init, 0k highmem)[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1[ 0.000000] NR_IRQS:48[ 0.000000] console [ttyS1] enabled, bootconsole disabled[ 0.000000] console [ttyS1] enabled, bootconsole disabled[ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)[ 0.090000] pid_max: default: 32768 minimum: 301[ 0.100000] Mount-cache hash table entries: 512[ 0.110000] NET: Registered protocol family 16[ 0.120000] MIPS: machine is Aztech HW550-3G[ 0.140000] bio: create slab at 0[ 0.150000] Switching to clocksource MIPS[ 0.160000] NET: Registered protocol family 2[ 0.170000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)[ 0.180000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)[ 0.200000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)[ 0.210000] TCP: Hash tables configured (established 1024 bind 1024)[ 0.220000] TCP reno registered[ 0.230000] UDP hash table entries: 256 (order: 0, 4096 bytes)[ 0.240000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)[ 0.260000] NET: Registered protocol family 1[ 0.300000] squashfs: version 4.0 (2009/01/31) Phillip Lougher[ 0.310000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.[ 0.330000] msgmni has been set to 58[ 0.340000] io scheduler noop registered[ 0.350000] io scheduler deadline registered (default)[ 0.360000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled[ 0.370000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A[ 0.380000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A[ 0.400000] physmap platform flash device: 00800000 at bf000000[ 0.410000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000[ 0.430000] Amd/Fujitsu Extended Query Table at 0x0040[ 0.440000] Amd/Fujitsu Extended Query version 1.3.[ 0.450000] number of CFI chips: 1[ 0.460000] 6 cmdlinepart partitions found on MTD device physmap-flash.0[ 0.470000] Creating 6 MTD partitions on "physmap-flash.0":[ 0.490000] 0x000000000000-0x000000030000 : "u-boot"[ 0.500000] 0x000000030000-0x000000040000 : "u-boot-env"[ 0.510000] 0x000000040000-0x000000050000 : "factory"[ 0.520000] 0x000000050000-0x000000130000 : "kernel"[ 0.540000] 0x000000130000-0x000000800000 : "rootfs"[ 0.550000] mtd: partition "rootfs" set to be root filesystem[ 0.560000] mtd: partition "rootfs_data" created automatically, ofs=6E0000, len=120000[ 0.580000] 0x0000006e0000-0x000000800000 : "rootfs_data"[ 0.590000] 0x000000050000-0x000000800000 : "firmware"[ 0.610000] TCP westwood registered[ 0.620000] NET: Registered protocol family 17[ 0.630000] 8021q: 802.1Q VLAN Support v1.8[ 0.640000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.[ 0.660000] Freeing unused kernel memory: 160k freed[ 2.800000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0[ 2.950000] Button Hotplug driver version 0.4.1- preinit -Press the [f] key and hit [enter] to enter failsafe mode- regular preinit -[ 6.490000] JFFS2 notice: (353) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 15 of xref (0 dead, 2 orphan) found.[ 7.300000] SCSI subsystem initialized[ 7.540000] usbcore: registered new interface driver usbfs[ 7.550000] usbcore: registered new interface driver hub[ 7.560000] usbcore: registered new device driver usb[ 8.220000] dwc_otg: version 2.72a 24-JUN-2008[ 8.230000] dwc_otg: Core Release: 2.66a[ 8.440000] dwc_otg: Periodic Transfer Interrupt Enhancement - disabled[ 8.460000] dwc_otg: Multiprocessor Interrupt Enhancement - disabled[ 8.470000] dwc_otg: Using DMA mode[ 8.470000] dwc_otg: Device using Buffer DMA mode[ 8.480000] dwc_otg dwc_otg.0: DWC OTG Controller[ 8.490000] dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1[ 8.510000] dwc_otg dwc_otg.0: irq 26, io mem 0x101c0000[ 8.520000] dwc_otg: Init: Port Power? op_state=1[ 8.530000] dwc_otg: Init: Power Port (0)[ 8.540000] hub 1-0:1.0: USB hub found[ 8.550000] hub 1-0:1.0: 1 port detected[ 8.650000] Initializing USB Mass Storage driver...[ 8.660000] usbcore: registered new interface driver usb-storage[ 8.670000] USB Mass Storage support registered.switching to jffs2- init -Please press Enter to activate this console. [ 20.750000] Compat-wireless backport release: compat-wireless-2012-02-23-9-g3e5b1f0[ 20.770000] Backport based on wireless-testing.git master-2012-02-27[ 20.820000] cfg80211: Calling CRDA to update world regulatory domain[ 21.410000] cfg80211: World regulatory domain updated:[ 21.420000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)[ 21.440000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)[ 21.450000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)[ 21.470000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)[ 21.480000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)[ 21.500000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)[ 21.560000] NET: Registered protocol family 10[ 22.810000] PPP generic driver version 2.4.2[ 22.940000] tun: Universal TUN/TAP device driver, 1.6[ 22.950000] tun: (C) 1999-2004 Max Krasnyansky [ 23.010000] IPv6 over IPv4 tunneling driver[ 23.170000] GRE over IPv4 demultiplexor driver[ 23.290000] GRE over IPv4 tunneling driver[ 23.570000] ip_tables: (C) 2000-2006 Netfilter Core Team[ 23.890000] NET: Registered protocol family 24[ 24.070000] nf_conntrack version 0.5.0 (471 buckets, 1884 max)[ 25.630000] xt_time: kernel timezone is -0000[ 26.840000] ip_set version 4 loaded[ 27.250000] nf_conntrack_rtsp v0.6.21 loading[ 27.280000] nf_nat_rtsp v0.6.21 loading[ 27.420000] xt_RAWNAT: Unknown symbol ipv6_find_hdr (err 0)[ 27.550000] Netfilter messages via NETLINK v0.30.[ 27.750000] ip6_tables: (C) 2000-2006 Netfilter Core Team[ 28.370000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0[ 28.380000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.[ 28.740000] usbcore: registered new interface driver usblp[ 28.780000] usbcore: registered new interface driver usbserial[ 28.800000] USB Serial support registered for generic[ 28.810000] usbcore: registered new interface driver usbserial_generic[ 28.820000] usbserial: USB Serial Driver core[ 28.960000] usbcore: registered new interface driver ums-alauda[ 29.000000] usbcore: registered new interface driver ums-cypress[ 29.040000] usbcore: registered new interface driver ums-datafab[ 29.070000] usbcore: registered new interface driver ums-freecom[ 29.110000] usbcore: registered new interface driver ums-isd200[ 29.150000] usbcore: registered new interface driver ums-jumpshot[ 29.190000] usbcore: registered new interface driver ums-karma[ 29.220000] usbcore: registered new interface driver ums-sddr09[ 29.260000] usbcore: registered new interface driver ums-sddr55[ 29.300000] usbcore: registered new interface driver ums-usbat[ 29.480000] USB Serial support registered for GSM modem (1-port)[ 29.500000] usbcore: registered new interface driver option[ 29.510000] option: v0.7.2:USB Driver for GSM modems[ 39.460000] ramips-wdt: timeout value 60 must be 0 2ff7e9595c
Comments